Bedsore/Pressure Sore Prevention:
It's a good thing we toss and turn in bed. That movement continually redistributes the pressure between our bodies and the mattress. If illness or injury prevents this movement, pressure builds up on specific areas of the body. This can cause skin and other tissues to die, creating a bedsore. A few simple steps, however, can help prevent these painful, dangerous, and costly sores, reports the November 2006 issue of the Harvard Health Letter."
In 2006, Medicare in the US, logged nearly 323 000 cases of pressure sores as secondary diagnoses. The average cost of treating these pressure sores was $ 40,381.
Bed sores, pressure sores and decubitus ulcers are painful, debilitating and unnecessary. Use this guide to learn about bed sores and their prevention. Bed sores can develop very quickly and may progress into a Stage 4 pressure ulcer; like the one shown below. Preventing this from happening should be of primary concern for all caregivers. These products are ideal for improving the comfort level of patients who have had a hip or knee replacement.
Bed sores tend to develop on people who are confined to bed or chair. Most often they are first seen in the tailbone or ankle areas. Fortunately, the risk of developing bed sores can be reduced significantly.
Decubitus ulcers and Bed sores tend to develop on people who are confined to bed or chair. Most often they are first seen in the tailbone or ankle areas. Fortunately, the risk of developing bed sores can be reduced significantly. Preventing bedsores is the logical and most humane method you have of caring for those confined to a bed or wheelchair. Bedsores are unnecessary and, 95% of the time, can be prevented. - American Family Physician, October 1996: v54, n5, p1519 (14)
Bed Sore Prevention Guidelines:
1. Take care of the skin:
Inspect the skin daily. Pay special attention to red areas and pressure points. Minimize moisture contact with the skin. Australian Medical sheepskins reduce pressure and wick moisture away from the skin, keeping it dry.
2. Protect the skin from injury:
Avoid massaging skin over bony areas. Change body position at least every 2 hours- more frequently in a chair. Reduce friction ( rubbing) by lifting rather than dragging. Do not use donut shape cushions. These can increase the risk of getting pressure ulcers by reducing blood flow in the areas of contact with the cushion. If the patient is confined to bed, reduce pressure points with Australian Medical Sheepskins. The head of the bed should be raised as little as possible. When the head of the bed is raised above 30 degrees, the skin may slide over the bed surface, damaging skin and small blood vessels. Pillows or wedges should be used to keep knees and ankles from touching each other. Patients should avoid lying directly on the hip bone when lying on their side. Pillows and Medical Sheepskin may help. If the patient is completely immobile, pillows should be put under their legs from mid-calf to ankle to keep heels off the bed. Never place pillows under the knees. This cuts off blood circulation. Use Australian Medical Sheepskins to protect the skin from injury.
3. Eat well:
Eat a balance diet. Proteins and calories are very important for healthy skin. Healthy skin is less liable to be damaged.
4. Improve the patients ability to move:
A rehabilitation program can help some people gain movement and independence. The patient can help to prevent most pressure sores.
Bed Sores, decubitus ulcers and pressure sores
develop through 4 stages.
Notify your medical practitioner and nursing staff if you notice any of the following:
You will notice redness of the intact skin. The skin is unbroken, but inflamed and may be painful and warm to the touch. You might also notice the skin's texture may be spongy or firm.
Here you will see the first sign of skin breakdown and partial skin loss. It will look like an abrasion, blister or shallow crater. The outer layer of the skin is broken, red and painful. Surrounding tissue may be pale, red or swollen.
Stages 3 & 4 result in ulcer production.
The skin has broken down and there is extensive destruction or damage to the underlying muscle, bone or supporting structures. Ulcers are extremely difficult to heal and may take many months for complete repair. Preventing the development of an ulcer should be considered seriously.
Bed sores, decubitus ulcers and pressure sores are unnecessary and can be prevented. Prevention is possible when you provide an environment for the patient that does not foster the formation of bedsores. This environment can be produced by Australian HiTemp UR Medical Sheepskins. These sheepskins are approved FDA Medical Devices.
Pressure Ulcer Stages Revised by NPUAP
February 2007 - The National Pressure Ulcer Advisory Panel (NPUAP) has redefined the definition of a pressure ulcer and the stages of pressure ulcers, including the original 4 above stages and adding 2 stages on deep tissue injury and unstageable pressure ulcers. This work is the culmination of over 5 years of work.
Pressure Ulcer Definition
A pressure ulcer is a localized injury to the skin and/or underlying tissue usually over a bony prominence, as a result of pressure, or pressure in combination with shear and/or friction. A number of contributing or confounding factors are also associated with pressure ulcers; the significance of these factors is yet to be elucidated.
Pressure Ulcer Stages
Suspected Deep Tissue Injury:
Purple or maroon localized area of discolored intact skin or blood-filled blister due to damage of underlying soft tissue from pressure and/or shear. The area may be preceded by tissue that is painful, firm, mushy, boggy, warmer or cooler as compared to adjacent tissue.
Deep tissue injury may be difficult to detect in individuals with dark skin tones. Evolution may include a thin blister over a dark wound bed. The wound may further evolve and become covered by thin eschar. Evolution may be rapid exposing additional layers of tissue even with optimal treatment.
Intact skin with non-blanchable redness of a localized area usually over a bony prominence. Darkly pigmented skin may not have visible blanching; its color may differ from the surrounding area.
The area may be painful, firm, soft, warmer or cooler as compared to adjacent tissue. Stage 1 may be difficult to detect in individuals with dark skin tones. May indicate "at risk" persons (a heralding sign of risk)
Partial thickness loss of dermis presenting as a shallow open ulcer with a red pink wound bed, without slough. May also present as an intact or open/ruptured serum-filled blister.
Presents as a shiny or dry shallow ulcer without slough or bruising.* This stage should not be used to describe skin tears, tape burns, perineal dermatitis, maceration or excoriation.
*Bruising indicates suspected deep tissue injury
Full thickness tissue loss. Subcutaneous fat may be visible but bone, tendon or muscle are not exposed. Slough may be present but does not obscure the depth of tissue loss. May include undermining and tunneling.
The depth of a stage 3 pressure ulcer varies by anatomical location. The bridge of the nose, ear, occiput and malleolus do not have subcutaneous tissue and stage 3 ulcers can be shallow. In contrast, areas of significant adiposity can develop extremely deep stage 3 pressure ulcers. Bone/tendon is not visible or directly palpable.
Full thickness tissue loss with exposed bone, tendon or muscle. Slough or eschar may be present on some parts of the wound bed. Often include undermining and tunneling.
The depth of a stage 4 pressure ulcer varies by anatomical location. The bridge of the nose, ear, occiput and malleolus do not have subcutaneous tissue and these ulcers can be shallow. Stage 4 ulcers can extend into muscle and/or supporting structures (e.g., fascia, tendon or joint capsule) making osteomyelitis possible. Exposed bone/tendon is visible or directly palpable.
Full thickness tissue loss in which the base of the ulcer is covered by slough (yellow, tan, gray, green or brown) and/or eschar (tan, brown or black) in the wound bed.
Until enough slough and/or eschar is removed to expose the base of the wound, the true depth, and therefore stage, cannot be determined. Stable (dry, adherent, intact without erythema or fluctuance) eschar on the heels serves as "the body's natural (biological) cover" and should not be removed.
If a bed sore has developed already, the best thing that you can do is to try and remove the cause of the bed sore. Pressure often causes bedsores. Pressure against the small blood vessels in the skin will cause them to collapse. Thus, blood flow to that area will be cut off. Skin cells, deprived of oxygen and nutrients will die. The death of the skin is the beginning of what is recognised as a bed sore. To prevent this from happening, you must reduce the pressure on the skin. This can be achieved by lying/sitting on a Australian Medical Sheepskin. Australian Medical Sheepskins also wick moisture away from the skin; keeping it dry and firm. Moist skin is more likely to tear when a person moves. Australian Medical Sheepskins reduce friction. If a person lies directly on a Australian Medical Sheepskin, skin abrasion and tears are less likely to happen.
Premium grade Australian Medical Sheepskins (AS4480-1 1998) add comfort and an improved feeling of well-being to those confined to a bed or wheelchair. The 2004 clinical trial at the Royal Melbourne Hospital found that people placed on these Australian Medical Sheepskins had 58% fewer bed sores than those placed on regular bed linen. For clinical trial details, click: Research
When a person rests on a HiTemp UR Medical Sheepskin, there are 3 continuous bed sore prevention effects:
1. Pressure reduction at the point of body contact with the sheepskin.
2. Reduction of friction and shearing forces which rub and tear the skin.
3. Prevention of the build-up of skin moisture.
Effective caregivers use HiTemp UR Medical Sheepskins to prevent or manage bed sores.
You might also consider the following products:
Low Temp Australian Medical Sheepskins- natural shape- M101
Hospital Fleece Nursing Pad F103A or F103B
Low Temp Australian Medical Sheepskin Bed Pad- 24" x 36" - M129BS
|Size||About 30" x 42"-
|Wool Type||Low temperature wash, Merino Medical Sheepskin.||Merino wool knitted into a backing material with a waterproof, breathable backing.||Low temperature wash Merino Sheepskin Bed Pad, with elastic straps to keep it in place.|
|Wool-Pile Density||Highest||Good||Below M101, but very good.|
|Washability||Wash in Woolskin in cold water. Air dry.||Machine wash with Woolskin. Dry in dryer.||Wash in Woolskin in cold water. Air dry.|
|Affordability||$180.00||Cheapest and best for institutional use. Easiest to care for.
( $90.00 -$195.00)
|Great value and very soft, fine wool.
Order from our Online Store, with its secure payment gateway. Or, if you are not sure about the best product for your situation, call us at: 1- 800- 463- 1985
Pressure Smart XD1900 is a new range of wool products, specially developed for the Prevention of Pressure Sores and Decubitus Ulcers. Made from Merino Superwash Wool with a pile density of 1900 grams/metre2. Because it is a manufactured product, all product items are the same..unlike sheepskins which differ from one to another.
Pressure Smart XD products are: machine washable and can be dried in the dryer..making them eminently suitable for institutional use. These products are recommended for incontinent clients; because of their ease of care and pressure sore prevention properties.
Try these new Pressure Smart XD 1900 products:
- M102XD- Overlay- 26" x 39"- for shoulders to below the buttocks protection.
- M103XD- Pressure Care Assist for heel protection
- M105XD- Cushion-It for wheelchairs
- SC104XD - Superior Pressure Smart XD Overlay- 30" x 60"- for total body protection.